Care andcleaninc – Sears 274.4345869A User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NO PICTURE, NO SOUND BUT POWER LICHT IS ON
•
Maybe cable/air function is in wrong position.
•
Maybe a vacant channel is tuned.
•
If watching VCR, make sure TV is tuned to channel 3 or 4 - same
as CH3/4 switch on VCR. Also check to make sure TV/VCR
switch on VCR is in correct position.
SOUND OKAY, PICTURE POOR
•
Check antenna connections.
•
Try adjusting sharpness function to improve weak signals.
CARE ANDCLEANINC
You can clean the TV as lequired, using a soft cloth or the dusting
attachment for your vacuum cleaner. Be sure to occasionally vacuum
the ventilation slots in the cabinet to help assure adequate ventilation.
To clean the TV screen, use a diluted soap and water mixture and a
soft cloth. Do not use furniture polish on the TV cabinet or screen.
While cleaning do not spray liquid directly on the screen, or
allow liquid to run down the screen and inside the TV. Also,
avoid placing drinks or vases with water on top of the TV.
This could increase the risk of fire, shock hazard, or damage
to the TV.
Caution: If fixed (non-moving) images are left on the screen for
long periods, they may be permanently imprinted on the screen.
Such images include network logos, phone numbers, and video
games. Extended viewing of channels displaying these images
should be avoided.
12