Sears 919.329150 - Manual (Page 19)

PROBLEM CAUSE CORRECTION
Eng^a wPtMaatart 1. Lowonftielorott.
2. Ignition switch (n 'Off' position.
3. Faulty spark plug.
4. Choke in wrong position.
5. Fuel shut-off valve In dosed
position.
6. Unit loaded during start-up.
7. Spark plug wirs loose.
1. Add fuel or oil.
2. Turn to 'ON* position
3. Replace sperk plug.
4. Adjust choke accordingly.
5. Open fuel shut-off valve.
6. Remove load from unit.
7. Attach wire to ^»rk plug.
No etectfKBl ou^iut
1. Faulty receptacle.
2. Circuit brsdter kidfod out.
3. Defective capacitor.
4. Faulty power oord.
5. GFCt receptacle drcult breaker
kicked out.
1. Have Authorized Sears Service
Center replace.
2. Depress and resst.
3. Have Authorized Sears Service
Center replace capacitor.
4. Repair or replace cord.
5. Depress and rsaet.
R^teatod ehouit Imaker
tNppktg
1. Overload
2. Faulty cords or equipment.
1 . Reduce load.
2. Cheek for damaged, bare, or
frayed wires on equipment
Replace.
Oenatator avarheaOng tha
oIrcuU bramar daprassad
1. Generator overloaded.
2. Insuffident ventilation.
1 , Reduce load.
2. Move to adequate supply of
fresh air.
19-ENQ
D204U M0«MD