Sears 758.144131 - Manual (Page 5)

Location instructions
WARNING: For your own safety, do
not use humidifier if any parts are
damaged or missing.
Step 1
Place humidifier on a flat level surface in
an area of house where most humidity is
needed, or one which would likely result in
moist air being circulated throughout the
house such as near a cold air return.
Placing the unit level is very important if
the humidifier is located on carpeting.
Moist air (humidity) produced will disperse
into the whole house, but area closest to
the unit will have the highest humidity, if
the unit is positioned close to a window,
condensation may form on the window
pane, if this is not appropriate the unit
should be repositioned in another location.
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air away
from home thermostat and hot air regis­
ters. It is best to position humidifier next to
an inside wall. Hot air registers and cold
air from outside walls can affect the effi­
ciencies of the controls. Unit should not be
placed where warm air from a hot air reg­
ister blows directly on unit.
steps
The humidifier should be positioned with
the back (cord exit side), at least 2 inches
away from the wall, ^r needs to enter
through the louvers in the rear of the cab­
inet in order for the humidifier to operate at
peak efficiency