Sears EZ3 917.2566 User Manual
Crrftsmfln, Assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
smm
CRRFTSMflN
MODEL NUMBER 917.256600
owner
s
manual
Assembly
Operation
Customer Responsibilities
Service and Adjustments
Repair Parts
Q
.
Thisproducthasalowemissionengtnewhichoperatesdifferendy
i from
previousl” built
enqines.
Before
\'Ou
start
the
enqine. read
■ and understand ims Cwner's f-Ianuai.
CAUTION: Read and follow all safety rules and instructions before operating this equipment.
FOR CONSUMER ASSISTANCE HOT LINE, CALL THIS TOLL FREE NUMBER: 1-B00-659-5917
Sears Roebuck and Co.. Hotfrnan Estates. IL 60179 U S.A.
Advertising
Table of contents
Document Outline
- smm
- CRRFTSMflN
- MODEL NUMBER 917.256600 owner s manual
- CONTENTS OF HARDWARE PACK
- Parts Bag contents shown full size
- Parts packed separately In carton
- Parts bag contents not shown full size
- TOOLS REQUIRED FOR ASSEMBLY
- TO REMOVE TRACTOR FROM CARTON
- BEFORE ROLLING TRACTOR OFF SKID
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Fig. 6)
- CONNECT BATTERY (See Fig. 2)
- INSTALL SEAT (See Fig. 3)
- CHECK TIRE PRESSURE
- CHECK BRAKE SYSTEM
- INSTALL MOWER AND DRIVE BELT (See Figs. 4 and 6)
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- INSTALL MULCHER PLATE (See Figs. 5A and
- TO CONVERT TO BAGGING OR DISCHARGING
- ©
- I
- KNOW YOUR TRACTOR
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 7)
- STOPPING (See Fig. 7)
- TO USE THROTTLE CONTROL (See Fig. 7)
- TO MOVE FORWARD AND BACKWARD (See Fig. 7)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 7)
- TO ADJUST GAUGE WHEELS (See Fig. 8)
- TO OPERATE ON HILLS
- TO TRANSPORT
- BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL (See Fig. 15)
- ADD GASOLINE
- TO START ENGINE (See Fig. 7)
- MOWING TIPS
- GENERAL RECOMMENDATIONS
- ENGINE
- CLEANING
- TO REMOVE MOWER (See Fig. 18)
- TO INSTALL MOWER
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER DRIVE BELT
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST ATTACHMENT CLUTCH (See
- TO ADJUST BRAKE (See Fig. 26)
- TO REPLACE MOTION DRIVE BELT (See Fig. 27)
- TRANSAXLE SHIFTER LINKAGE AND ADJUSTMENT (See Figs. 28 and 29)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN/eAMBER
- TO REMOVE WHEEL FOR REPAIRS (See Fig. 30)
- TO START ENGINE WITH A WEAK BATrERY (See Fig. 31)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 32)
- ENGINE
- STORAGE
- TROUBLESHOOTING POINTS
- TROUBLESHOOTING POINTS
- KNOW YOUR TRACTOR
- I