Basic saw operations – Sears 113.23522 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Basic Saw Operations
MITER SAW
Cutting a Dimensional 4x4 (3-1/2“ x 3-1/2" actual)
with one cut.
A dimensional 4x4 may be cut with one cut by attaching
an auxiliary fence of 7/8 thickness, with screws to the
miter saw fence as shown on previous page.
MITER SAW
Vertical Bevel Cutting
To make a miter cut in a 2x4 workpiece (actual 1-5/8“ x
3-1/2") In the vertical position (on edge) a spacer, such
as the auxiliary fence described in the previous page, is
required.
20
Advertising
This manual is related to the following products: