Maintenance, General recommendations – Sears Craftsman 247.77586 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
is likely that the shredding blade and/or chipper
blades are dull and need to be sharpened or
replaced. Refer to Service and Adjustments section.
IMPORTANT:
There is a flail screen located inside
the housing in the discharge area. If the flail screen
becomes clogged, remove and clean as instructed in
the Service and Adjustments section.
A
WARNING:
The chipper-shredder
discharges materials with considerable
velocity.
Keep away
from the area around the
discharge chute. Always
stop the engine
and disconnect spark plug wire when
removing or attaching the bag, changing
containers, or removing the shredded
material. Wear safety glasses and gloves
whenever using your chipper-shredder.
MAINTENANCE
1. GENERAL RECOMMENDATIONS
•
Always observe safety rules when performing
any maintenance.
•
The warranty on this snow thrower does not
cover items that have been subjected to operator
abuse or negligence. To receive full value from
the warranty, operator must maintain the chipper-
shredder as instructed in this manual.
•
Some adjustments will need to be made
periodically to maintain your unit properly.
A
All adjustments in the Service and Adjustments
section of this manual should be checked at least
once each season.
Follow the maintenance schedule given below.
Periodically check all fasteners and make sure
these are tight.
WARNING:
Always stop the engine and
disconnect
the spark plug wire before
performing any maintenance or
adjustments.
Never remove discharge
chute
till the engine has completely stopped.
11