Muffler, Spark plugs, In-line fuel filter (see fig. 19) – Sears 917.257643 User Manual

Page 19: Cleaning, Customer responsibilities

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CUSTOMER RESPONSIBILITIES

MUFFLER

Inspect and replace corroded muffler and spark arrester (if
equipped) as it could create a fire ha

2

ard and/or damage.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing
season or after every 100 hours of operation, whichever
occurs first. Spark plug type and gap setting are shown in
■PRODUCT SPECIFICATIONS” on page 3 of this manual.

IN-LINE FUEL FILTER (See Fig. 19)

The fuel filter should be replaced once each season, if fuel
filter becomes clogged, obstructing fuel flow to carburetor,

replacement is required.

® With engine cool, remove filter and plug fuel line

sections

Place new fuel filter in position In fuel line with arrow
pointing towards carburetor,

Be sure there are no fuel line leaks and clamps are

properly positioned.

» Immediately wipe up any spilled gasoline,

CLEANING

» Clean engine, battery, seat, finish, etc. of all foreign

matter.

» Keep finished surfaces and wheels free of all gasoline,

oil, etc.

° Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose to clean your

tractor unless the electrical system, muffler, air filter and

carburetor are covered to keep water out. Water in engine
can result in a shortened engine life.

19

Advertising