Adjustments – Sears 247.8809 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. To stop the engine push the shorting clip. See
figure 8.
FIGURES.
ADJUSTMENTS
CAUTION
Do not at any time make any adjust
ments to lawn mower without first
stopping engine and disconnecting
spark plug wire.
CUTTING HEIGHT
Adjustment may be made by removing and
moving wheel axle bolts to desired position.
Cutting heights will be raised as wheel axle bolts
are moved to a lower hole and lowered as wheel
axle bolts are moved to a higher hole in the deck.
All wheel axle bolts must be mounted in a relative
position to the deck.
LUBRICATION
IMPORTANT: Always stop engine and disconnect
spark plug wire before cleaning, lubricating or
doing any kind of work on lawn mower.
Wheels—Wheel bearings are of self-lubricating
Fortiflex. They require no lubrication. If your unit
is provided with optional ball bearing wheels,
lubricate at least once a season with light oil.
Protective Shield—The pivot points on the
protective shield should be lubricated periodically
with light oil to prevent any rust or binding.
Chute Deflector—The torsion spring and pivot
point should be lubricated periodically with light
oil to prevent any rust or binding. Deflector must
work freely.
FIGURE 8.