Assembly – Sears 917.257632 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ASSEMBLY

INSTALL BATTERY (See Figs. 4 and 5)

A

CAUTION: Do not short battery termi-
rials. Before installing battery, remove
metal bracelets, wristwatch bands,
rings, etc.

Positive terminal must be connected
first to prevent sparking from acciden­

tal grounding.

« Lift seat to raised position

■ Open battery box door.
» Be sure battery drain tube is attached to battery box.

» Lower battery into battery box with battery terminals

toward front of tractor.

“ First connect RED battery cable to positive (+) terminal

with hex bolt, flat washer, lock washer and hex nut as
shown. Tighten securely.

• Connect BLACK grounding cabie to negative (-) termi­

nal with remaining hex bolt, flat washer, lock washer
and hex nut. Tighten securely.

0

Close battery box door.

Open battery box door for:
o Inspection for secure connections (to tighten hard­

ware),

» Inspection for corrosion.

» Testing battery.

» Jumping (if required),
«■ Periodic charging.

BATTERY
BOX DOOR

POSITIVE
(RED)
CABLE

NEGATIVE
(BLACK)
CABLE

FLAT
WASHER

HEX
BOLT

POSITIVE (+) TERMINAL NEGATIVE {-) TERMINAL

FIG. 4

BATTERY
BOX DOOR

VENT CAPS

FIG. 5

/CHECKUST

BEFORE YOU OPERATE AND ENJOY YOUR NEW

TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTION FROM
THIS QUALITY PRODUCT

PLEASE REVIEW THE FOLLOWING CHECKLIST:

/
/
/

All assembly instructions have been completed.

No remaining loose parts in carton.

Battery is properly prepared and charged. (Minimum

1

hour at

6

amps).

/ Seat is adjusted comfortably and tightened securely.

/ All tires are properly inflated. (For shipping purposes,

the tires were overinfiated at the factoiy).

/ Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results. (Tires must be

properly inflated for leveling).

/ Check mower and drive bells. Be sure they are routed

properly around pulleys and inside all belt keepers.

/ Check wiring. See that all connections are stifi secure

and wires are properly clamped.

WHILE LEARNING HOWTO USE YOUR TRACTOR. PA Y

EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:

/ Engine oil is at proper ieve!.
/ Fuel tank is filled with fresh, clean, regular unleaded

gasoline.

/ Become familiar with all controls - their location and

function. Operate them before you start the engine,.

/ Be sure brake system is in safe operating condition.

Advertising