Sears EZ3 917.256543 User Manual
Assembly flhrflup, Owner, Manual
Advertising
Table of contents
Document Outline
- smm
- ® Assembly flHrflUP?
- »Customer Responsibilities ® Service and Adjustments ® Repair Parts
- Safe Operation Practices for Ride-On Mowers
- ENGINE
- MAINTENANCE
- PERFORMANCE
- Parts Bag contents shown futi size
- Parts packed separately in carton
- Parts bag contents not shown fyll size
- UNPACK CARTON
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)
- CONNECT BATTERY (See Figs. 2 and 3)
- INSTALL SEAT (See Fig. 4)
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- CHECK BRAKE SYSTEM
- ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 5)
- INSTALL MULCHER PLATE (See Figs. 6 St 7)
- TO CONVERT TO BAGGING OR DISCHARGING
- P! i (®)|I
- READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (Se© Fig. 9)
- TO OPERATE MOWER {See Fig. 10)
- TO OPERATE ON HILLS
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL (See Fig. 17)
- ADD GASOLINE
- TO START ENGINE (See Fig. 9)
- MULCHING MOWING TIPS
- BEFORE EACH USE
- LUBRICATION CHART
- BRAKE OPERATION
- TIRES
- BLADE CARE
- BLADE REMOVAL (See Fig. 13)
- TO SHARPEN BLADE (See Fig. 14)
- BATTERY
- V-BELTS
- TRANSAXLE COOLING
- LUBRICATION
- CLEAN AIR SCREEN (See Fig. 16)
- AIR FILTER (See Fig. 16)
- CLEAN AIR INTAKE/COOLING AREAS
- MUFFLER
- SPARK PLUGS
- ENGINE OIL FILTER (See Fig. 17}
- IN-LINE FUEL FILTER (See Fig. 18)
- TO REMOVE MOWER (See Fig. 19)
- TO INSTALL MOWER (See Fig. 19)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST BRAKE (See Fig. 25)
- TO REPLACE MOTION DRIVE BELT
- TRANSAXLE SHIFTER LINKAGE AND ADJUSTMENT {See Figs. 27 and 28)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-1N/CAP8ER
- TO REMOVE WHEEL FOR REPAIRS
- {See Fig. 29)
- TO START ENGINE WITH A WEAK BATTERY {See Fig. 30)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 31)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 32)
- TO ADJUST CARBURETOR (See Fig, 33)
- BATTERY
- FUEL SYSTEM
- ENGINE OIL
- CYLINDERS