Assembly instructions, 1assembly instructions – Sears 247 886510 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Handle
Right
Hand
Lower
Handle
^ Assembly
. ^
1
\
i
----------
J
Left
1
ASSEMBLY INSTRUCTIONS
■^NOTE
Reference to right and left side of the
snow thrower is from the operator’s
position at the handle.
TOOLS REQUIRED FOR ASSEMBLY
pper
■Handle
As: sembly
Traction Drive.
Cable
Auger—»-«a
Cable
!»hift
Rod
Chute Crank Assen ibly
FIGURE 1.
u
ur
u
5/16"
Cupped
Hand Knobs Washers
1 Knife (to cut carton)
2 Vz" Wrenches (or Adjustable Wrenches)
1 Pair of Pliers
1 9/16" Wrench (or Adjustable Wrench)
1 7/16" Wrench (or Adjustable Wrench)
-CONTENTS OF SHIPPING CARTON (See
figure 1)
1
. Snow Thrower
(not shown)
2.
Lower Handles—R.H. and L.H.
3. Handle Panel Assembly
4. Upper Handle Assembly
5. Traction Drive Cable Assembly
6. Auger Cable
7. Parts taped together
which include:
Shift Rod
Chute Crank Assembly
Hardware Pack
(plastic bag) which contains the
hardware shown in figure 2 (shown actual size),
plus one chute crank bracket and two ignition keys
which are not shown.
Tire Chains
(not shown)
FIGURE 2.