Sears KENMORE 385. 12708 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE THE MACHINE FOR SEWING
Prepare the Bobbin
• To Remove the Bobbin Case from the Machine
the machine by pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
Wind the Bobbin
tie, pull open latch of bobbin case.
Pull bobbin case straight out of
shuttle.
moving
bobbin.
while you wind the
Advertising
This manual is related to the following products: