Sears 831.280781 - Manual (Page 2)

Before You Begin Assembly—Cont.
Congratulations for purchasing the innovative
PROFORM* AB RESISTER. The AB RESISTER is
designed to shape your upper abs, obliques, and lower
abs to give you a firm, flat stomach, in only minutes a
day. The unique AB RESISTER supports your head and
neck as you exercise, and helps you maintain correct
form for maximum results. Used as part of a fitness pro­
gram that includes regular aerobic exercise and a proper
diet, the AB RESISTER will help you to look better,
feel better, and enjoy the benefits of bett^ fitness.
Before you use the AB RESISTER, please read this
manual carefully. In addition, be sure to view the
included videocassette. If you have additional questions,
please call our toll-free HHJPUNE at 1-800-736-6879,
Monday through Saturday, 7 ajn. until 7 p.m. Central
Time (excluding holidays). To help us assist you quick­
ly, please note the product model number before calling;
the model number is 831.280781.
Assembly
Place all parts in a cleared area and remove the packing
materials; do not dispose of the packing materials until
assembly is completed. Assembly requires your standard
screwdriver
phi^s screwdriver ■
and rubber mallet cjl — _ [| (not indnded).
2. Attach a Side
Frame (11) to the
Frame (3) with two
3 1/4" Screws (13), a
Frame Spacer (12),
and two 1/4" Barrel
Nuts (14), Repeat
this step on the other
side of the Frame.
Make sure that the
Foam Pads (5) are
positioned as shown in drawing
3. Press the indicat­
ed Button (IS) and
slide the Right
Resistance Spring
(6) onto the Frame
(3). Move the
Resistance Spring
back and for^ until
the Button snaps
into one of the three
holes. Repeat this
step for the left side
of the Frame.
1. Before attaching
the Headrest (2) see
drawing la for the
proper orientation.
Make sure that when
assembled the
tapered end of the
Headrest points
slightly up and away
from the Frame (3)
as shown.
Attach the Headrest (2)
to the Frame (3) with
two I 3/4” Screws (9)
and two Rubber Feet
( 10 ).
4. Press the two
Buttons (IS) in the
Handle (1). SUde the
Handle into the Side
Frames (11). Be
sure to insert the
Handle straight or
it may bind. It may
be helpful to rock
the Handle from
side to side slightly
as you insert it
Lay the exercise mat
on the floor with the
wide end near the
headrest.