Christie Digital Systems Cine-IPM - Manual (Page 2)

Video Inputs
• Standard - 1 (one) RGB input - 5 BNC
with separate H and V sync, composite
sync or sync-on-green, also accepts
analog YPbPr, sync-on-Y or comp sync,
bi-level or tri-level 1 (one) analog
composite-video.
• Standard -1 (one) digital Video
Decoder module, accepts 1 (one)
composite-video source and 1 (one)
S-video with switchable termination,
accepts NTSC, NTSC 4.43, PAL, PAL M,
PAL N, SECAM.
• 1 (one) option module slot. This slot
accepts a range of analog and digital
input modules for serial digital
component video (SDI), serial digital
high-definition (HD-SDI), and digital
computer signals via (DFP) Digital
Flat Panel or (DVI) Digital Video
Interface standards.
Internal processing
• 10-bit
Video Output
• DVI: (1) Digital Video Interface:
standard output at 1280 x 1024,
50/60 Hz
Communication Interface Connections
• In/Out: 3 x 9-pin D-sub RS232
connectors
• 6-pin XLR RS422 connection
Front Panel LCD
• Displays active source and format
display: Four line LCD display of 40
characters concurrent display of input
source type
Special Features
• Spatial dithering of graphic resource:
including HD
Power Supply
• Built-in power supply 100VAC-
240VAC, 50/60 Hz
Power Consumption
• 200W
Dimensions
• 6.98” H x 13.67” D x 17.25” W
• 177.3mm H x 347.2mm D x 438.2mm W
Supplied Accessory
• Cine-IPM IR or Wired remote
Optional Accessories
• 38-804611-01 - HD/SDI Input Module
for Cine-IPM
• 38-804602-01 - SDI Input Module
for Cine-IPM
• 38-804614-01 - DFP/DVI Input Module
for Cine-IPM
Cine-IPM
•
Specifications
• Seamless interfacing and
connectivity with DCP-H and
DCP-I touch screen controller. • Suitable for satellite television
rebroadcast, corporate presentations. • CINE-IPM offers an enhanced
range of software control
features.
F E AT U R E S
WWW.CHRISTIEDIGITAL.COM
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.
Due to constant research,
specifications are subject to
change without notice
.
May 02-NA
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: +714-236-8610
FX: +714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: +519-744-8005
FX: +519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]