Sears 917.25148 User Manual
Sears
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SEARS
ip W
r-u^S&T
№
ii%
Vi'..-J
MODEL NUMBER 917.251480
® Assembly
® Operation
® Customer Responsibilities
® Service and Adjustments
® Repair Parts
OWNER’S MANUAL
0
m
CAUTIOM: Read and follow all safety rules and instructions before operating this equipment.
FOR CONSUMER ASSISTANCE HOT LINE, GALL THIS TOLL FREE NUMBER: 1 -800-659-5917
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Advertising
Table of contents
Document Outline
- ii%
- TABLE OF CONTENTS
- CONTENTS OF HARDWARE PACK
- Parts Bag contents shown full size
- Parts packed separately In carton
- Parts bag contents not shown full size
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Fig. 6)
- READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE {See Fig. 7)
- STOPPING (See Fig. 7)
- TO USE THROTTLE CONTROL (See Fig. 7)
- TO USE CHOKE CONTROL (See Fig. 7)
- TO MOVE FORWARD AND BACKWARD (See Fig. 7)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 7)
- TO ADJUST GAUGE WHEELS (See Fig. 8)
- TO OPERATE MOWER (See Figs. 6 and 7)
- TO OPERATE ON HILLS
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL (See Fig. 10)
- ADD GASOLINE
- TO START ENGINE (See Fig. 7)
- MULCHING MOWING TIPS
- BEFORE EACH USE
- TRACTOR
- BRAKE OPERATION
- TIRES
- BLADE CARE
- BLADE REMOVAL (See Fig. 13)
- V“BELTS
- TRANSAXLE COOLING
- CHECK TRANSAXLE OIL LEVEL (See Fig. 15)
- TO SHARPEN BLADE (See Fig. 14)
- BATTERY
- LUBRICATION
- CLEAN AIR SCREEN (See Fig. 17)
- ENGINE COOLING FINS (See Fig. 17)
- AIR FILTER (See Fig. 18)
- MUFFLER
- SPARK PLUGS
- ENGINE OIL FILTER
- IN-LINE FUEL FILTER (See Fig. 19)
- TO REMOVE MOWER (See Fig, 20)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER DRIVE BELT
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 25)
- TO ADJUST ATTACHMENT CLUTCH (See Fig. 26)
- TO ADJUST BRAKE (See Fig. 27)
- TO REPLACE MOTION DRIVE BELT (See Fig. 28)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-IN ADJUSTMENT
- FRONT WHEEL CAMBER
- SERVICE AND ADJUSTMENTS
- TO REMOVE WHEEL FOR REPAIRS
- TO START ENOINE WITH A WEAK BATTERY (See Figs. 32) * •
- TO REPLACE FUSE
- TO ADJUST ATTACHMENT LIFT SPRING (See Fig. 33)
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 34)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 3S and 36)
- TO ADJUST CARBURETOR (See Fig. 37)
- BATTERY
- FUEL SYSTEM
- ENGINE OIL
- CYLINDERS
- TROUBLESHOOTING POINTS
- TROUBLESHOOTIMG POINTS