Sears 917.257651 User Manual
Seairs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SEAIRS
MODEL NUMBER 917.257651
owner
s
manual
® Assembly
® Operation
® Customer Responsibilities
• Service and Adjustments
® Repair Parts
TM
Converti ble
CAUTION: Read and follow all safety rules and instructions before operating this equipment.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A
! -f\v№
Advertising
Table of contents
Document Outline
- MODEL NUMBER 917.257651 owner s manual
- SAFETY RULES
- Safe Operation Practices for Ride-On Mowers
- MAINTENANCE
- PREPARE BATTERY {See Fig. 2)
- INSTALL SEAT (See Fig. 3)
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- CHECK BRAKE SYSTEM
- TO CONVERT TO BAGGING OR DISCHARGING
- READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (See Fig. 9)
- TO OPERATE MOWER (See Fig. 10)
- TO OPERATE ON HILLS
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL (S0© F19.17)
- ADD GASOLINE
- TO START ENGINE (See Fig. 9)
- BEFORE EACH USE
- BRAKE OPERATiON
- TIRES
- BLADE CARE
- BLADE REMOVAL (See Fig. 13)
- TO SHARPEN BLADE (See Fig, 14)
- BATTERY (See Fig. 15)
- V-BELTS
- TRANSAXLE COOLING
- LUBRICATION
- AIR FILTER (See Fig. 17)
- CLEAN AIR SCREEN (See Fig. 17)
- CLEAN AIR INTAKE/COOUNG AREAS
- ENGINE OIL FILTER (See Fig. 18)
- MUFFLER
- SPARK PLUGS
- IN-LINE FUEL FILTER (See Fig. 19)
- TO REMOVE MOWER (See Fig, 20)
- TO INSTALL MOWER (See Fig. 20)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 25)
- TO ADJUST BRAKE (See Fig. 26)
- TO REPLACE MOTION DRIVE BELT (See Fig. 27)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOEJN/CAMBER
- TO REMOVE WHEEL FOR REPAIRS (See Fig. 28)
- TO START ENGINE WITH A WEAK BATTERY (See Fig. 29)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 30)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 31 )
- TO ADJUST CARBURETOR (See Fig. 32)
- SAFETY RULES
- STORAGE