Wiring with wall switches, Fan and light on a single wall switch, Fan and light on separate wall switches – Hunter 25271 Globe Fitter User Manual
Page 2: Mm/im
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WIRING WITH WALL SWITCHES
FAN AND LIGHT KIT CAN BE CONNECTED THROUGH WALL SWITCHES, THIS CAN BE DONE IN TWO WAYS;
1. USING ONE WALL SWITCH TO CONTROL BOTH FAN AND LIGHT. INDIVIDUAL CONTROL OF EITHER FAN
OR LIGHT IS DONE WITH THE PULL CHAIN SWITCHES.
2. USING TWO WALL SWITCHES TO INDIVIDUALLY CONTROL BOTH FAN AND LIGHT - ONE FOR THE FAN
AND THE SECOND FOR THE LIGHT. PULL CHAIN SWITCHES ON THE FAN DO NOT HAVE TO BE USED.
SELECT THE TYPE OF CONTROL DESIRED AND WIRE THE UNIT PER ONE OF THE DIAGRAMS SHOWN BELOW.
FAN AND LIGHT ON A SINGLE WALL SWITCH
FAN AND LIGHT ON SEPARATE WALL SWITCHES
FORM NO, 41367-01
E/98
SIDE
a
■a...
mm/iM
MUNn-ft FAM COMPANY
2500 fPilSCO
AVENUE
swcs laae
MEMPHIS,
to
3iit4
©1995 HUNTER FAN COMPANY