“set” installment in bracket base, Fixing ‘location screw’ in cabinet, Installment of trim frame – Amana UMTK27 User Manual
Page 2: Installment of bracket left, “set” installment in cabinet, Trim frame dimensions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. “SET” installment in
Bracket Base
3. Fixing ‘location screw’ in cabinet
5.
Installment of Bracket Bottom
7. Installment of Trim Frame
Remove 4 screws from the lower right and left parts
of outer panel, place “SET” in Bracket Base and fix
it by tightening 4 screws again.
template 1.
2. Installment of Bracket Left
4. “SET” installment In cabinet
Assemble the Bracket Left to outer panel.
bottom screw of cabinet can place in the hole of
Bracket Bottom.
Push “SET” in until the bent part of front Bracket
Base touches the front of cabinet.
Place Bracket Bottom on Bracket Base like picture
B. Make holes of position A fit to Bracket Base’s
and fix screws after making holes with a 7/64 drill or
a #35 drill.
Install “Bracket Bottom” by tightening screws at
screw points.
6. Installment of Bracket Top
With template 2, make 2 holes each at the upper
right and left parts of cabinet. (Others for the extra)
Fix “BracketTop” according to the holes.
Install Trim Frame to make contact cabinet.
8. Installment of Trim Frame
Fix 2 screws each at the upper and lower parts of
Trim Frmae with the door open.
• Fix it by color screw
Trim Frame Dimensions
(Depth of trim Frame is 7/8")
26 '/a"
29
"
19 H"
19