Amana L0503010 - Manual (Page 4)

posmoNwc; ras
dishwashbr
{«»»tinued)
Virtii'ii HS'ivijliii!;; dNilvtiifilli-!VKrK!‘ H n|r!:H^i Vijiirir lliior to
LE¥EL WSIWASIIR
Leveling legs align the disliw asher vertically and horizontally, A combination of these
two adjustments are iietessan to properly position the dishwasher and insure proper fit
of door and latch, Dislr,\ashei must be LEVEL, solid, and square,
: :i !|jr;.1;by;vgHn:! !i!c yqnLr lidicHbiaiHiy ittUiiniifitiin tiiHyayy^ cisitti :!: sii.i:atib;i :iH(;et;-:. i
S 1 CUM 16 THE ilSlWASll-: H
Make pilot holes in the underside of counter and drive wood screws, provided in the
accessory package, through holes in the dishwasher mounting bracket. If part of
the bracket extends beyond the cabinet front, they may be trimmed with wire
cutters, provided sufficient material is left to support dishwasher mounting.
Note: Dishwasher must be secured properly to
countertop to avoid tipping when the door is open and
to prevent the tub from twisting.
It may be necessary to provide an additional
anchoring source for mounting screws. Wood
strips across the top of dishwasher opening can be
used for solid surface or granite type counters to secure the dishwasher.
iTiii;- :Rt:.!Vi; i.C':Viuintyi-l.t.qrCii;a‘UjrrU;.t;;crcc fc|c: t'Orlijik::/:':
ciwajisiftjv sw;n)tiig;ai>hw.bsi):cr ; ■ ■
iMIi lOSi ATTACHMINI'
^ If draining into tlie disposer, check to make sure disposal plug has been removed.
If not, remove as shown.
© With dishwasher in permanent position, clamp drain hose to a properly sized
drain line.