Polaris PR199-100-3NV User Manual

Year residential polaris, Year tank warranty 1 -year parts warranty, High-efficiency residential gas water heater

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

brought to Canada by

Requires 120 Volt 60Hz Power Supply.

Draws less than 5 Amps

NOTE: SEE INSTALLATION MANUAL FOR PIPING DIAGRAMS.

N T

3 1/2" DIA. -T

CONCENTRIC VENT KIT

(OPTIONAL)

10-Year Residential Polaris®

Note: Dimension *G’ = 5 3/4"

MODEL NUMBER

TANK

CAP.

(GAL.)

INPUT

BTU
PER

HOUR

THERMAL

EFFICIENCY

G.P.H.

REC.

90'

RISE

EXTERIOR

A B

1 " WATER

CONNECTIONS

C D

T&P

HGT.

E

1/2"
GAS

SUPPLY

F

APPROX.

SHIP

WT.

PR100-34-2NV

34

100,000

96

129

48.5

22

15.75

40.5

41

6-1/8

150

PR130-34-2NV

34

130,000

96

166

48.5

22

15.75

40.5

41

6-1/8

150

PR130-S0-2NV

50

130,000

95

166

62.5

22

15.75

54.5

55

6-1/8

176

PR150-34-2NV

34

150,000

95

186

48.5

22

15.75

40.5

41

6-1/8

150

PR199-100-3NV

100

199,000

96

257

70

28

23.25

56.25

63

6-3/8

486

For propane, substitute “P” for “N" in the modei number. 3" Concentric Vent Part #6910543 or 2" Concentric Vent Part #6910542. Specifications are
subject to change without notice in accordance with our poiicy of continuous improvement, input, output and recovery may vary depending upon air
iniet and exhaust outlet instaliations. Length and number of bends in inlet and outiet pipes may reduce input and output. Consult instaiiation,
operation and service manual for details. Dimensions on all charts shown in inches.

Specification

Residential gas-fired water heater(s) shall be a direct/power vent Polaris model

_______ as manufactured by American Water Heater Company and shall have a 10-
year limited tank warranty and a 1-year limited parts warranty, as outlined in the written
warranty. Units shall be designed to burn_________ (natural/propane) gas and be CSA

International certified to the latest edition of ANSI standard Z21.10.3/CSA 4.3. Water
heater(s) shall have a nominal storage capacity of______ gallons and a recovery rate of

____ GPH @ 90PF rise with a rated input of________ BTU/Hr. Water heater(s) shall be
condensing type with a minimum thermal efficiency of 95-96%, power vented with PVC,

ABS, or CPVC pipe. Water heater(s) shall have combined vent capabilities of up to 120'
to the exhaust outlet with up to 120' to the air inlet. Water heater(s) shall have a low
noise combustion system with a woven fibre steel burner capable of low NOx (less than
40 ng/j) in the blue flame mode and shall be manufactured of refractory steel, resistant
to thermal and mechanical shock. The gas valve shall be a Honeywell CV1-r1 series
gas valve with a matching 45.900 series venturi manifold using a 1:1 air/gas ratio. The
combustion system shall be factory adjusted and require no field adjustment on
startup. The tank shall be constructed of 444 stainless steel with a submerged
combustion chamber and rated for 150 PSI working pressure and 300 PSI test
pressure. The tank shall be surrounded by two inches of non-CFC foam insulation
covered by an enamel coated metal jacket. Operating controls shall have a 24-volt
integrated control circuit, an immersed thermistor temperature sensor, a recycling
energy cut-off switch, external temperature adjustment, and shall have LED lights that
continuously indicate the operational status of the water heater(s). A microprocessor
shall automatically monitor nine critical operating functions and signal the status of
each. A factory installed temperature and pressure relief valve shall be provided on all
models. A factory provided water thermostatic tempering valve shall be provided with
all models.

Order Entry and Sales

GSIV Water Heating

A GSIV Inc. Company

599 Hill Street West,
Fergus, ON, Canada N1M 2X1

Tel: 1-888-599-2837

Product Service and Support

P.O. Box 1597, 500 Princeton Road
Johnson City, TN 37605-1597

Tel: 1-800-456-9805

Fax: 1-800-999-5210

Distributed By

brought to Canada by

HIGH-EFFICIENCY RESIDENTIAL GAS WATER HEATER

10-Year Tank Warranty
1 -Year Parts Warranty

•Stainless Steel Tank with Submerged Combustion

High grade 444 stainless steel tank with brass connections for years of dependable,

trouble-free service - no anode required. Submerged combustion chamber with
spiral flue for 95-96% thermal efficiency and ultra-low standby heat loss of
approximately 1%.

•Sealed Combustion with Woven Fibre Premix Burner

Metal fibre burner is designed for clean combustion in high-intensity blue flame

mode. Manufactured of refractory steel that resists corrosion. Excellent resistance to

thermal and mechanical shock, even at extreme temperatures. Uniform combustion

provides excellent heat transfer. Meets Low NOx requirements for California

and Texas.

•Whisper Quiet Operation

Ultra quiet blower and burner minimize noise.

•Power/Direct Vent Using 2" or 3" Plastic Pipe

Direct vents up to 120' using PVC, CPVC, or ABS pipe. Vents through-the-wall or

roof. Optional concentric vent kit available for use through-the-roof or wall.

•Plug-and-Play Technology

No special adjustments are required at initial start up. Connect air inlet, exhaust

outlet, water, electricity, and gas, set the temperature and the system functions

properly.

•Self-Diagnostic Control System

Three external LED lights indicate operational status of water heater. Microprocessor
monitors nine critical functions. An LED troubleshooting light, visible through view
port, signals heater operation status.

•Full Serviceability from the Front

Removal of two front-located access panels exposes all serviceable components.
Modular components are easily removed.

•Multiple 1" Tank Connections - Brass

Potable water and space heating connections provided. Use with potable water only.

•Factory Provided Tempering Valve

Helps stretch hot water supply by automatically mixing hot and cold water.

•Other Features

Thermister Temperature Sensor
Hot Surface Ignition

ASHRAE 90.1 b-1992 Compliant

Factory Installed T&P Valve
Complies with California Title 24

24-Volt Thermostat Control

Full Flow Brass Drain Valve

Zero Clearance to Combustibles

Factory Provided Condensate Trap (CPVC)

•CSA International Certified to ANSI Z21.10.3/CSA 4.3

Copyright© by American Water Heater Company

2002. Aii rights reserved.

All rights reserved. No port of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage retrieval system, without permission in writing from American Water Heater Company.

12/05

RP133C

All rights reserved. No port of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any inhumation storage retrieval system, without permission in writing from American Water Heater Company.

12/05

RP133C

Advertising
This manual is related to the following products: