Automatic permanent press/knits cycle, How to use your dryer – Amana LE7163WM/LM User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

How to Use Your Dryer . . .

The timer knob will not advance
with the same regularity in the
AUTOMATIC cycle as it does in
the TIME DRY cycle.

For example, you may notice the

timer knob remains in the same

position for 15 minutes before it
begins to move. THE TIMER IS

NOT MALFUNCTIONING. This
only means it took 15 minutes for

the load to become dry enough to
start advancing the timer knob.
The length of time it takes for the
timer knob to begin advancing
depends on the type and size of
load being dried.

Automatic Regular and Automatic Delicate Cycles

Suggested Dryer Settings

Automatic Regular and Automatic Delicate Cycles

Load Type

Load Size

Small

Medium

Large

Heavy Cottons
Rugs
Denim

Corduroys

More Dry

Between

More &

Less Dry

Less Dry

Cotton Work Clothes
Cotton Knits

More Dry

Less Dry

Between

Less Dry

& Cool-Down

Dresses
Dress Shirts

Between

More &

Less Dry

Less Dry

Between

Less Dry

& Cool-Down

Sheer
Lightweight Cottons

Items Labeled "Dry

With Low Heat"

Automatic

Delicate

Automatic

Delicate

Automatic

Delicate

Hint:

Set timer based on
previous load types and

sizes. If load is too dry,
set timer closer to Less

Dry mark. If load is too g,

wet, set timer closer to

More Dry mark.

Cool-Down Periods
The AUTOMATIC REGULAR and

AUTOMATIC DELICATE cycles
have a five minute cool-down
period at the end of the cycle.
During that time, the load is
tumbled with no heat. This helps
reduce wrinkling. Setting the timer
knob in a COOL-DOWN position
will result in the load being
tumbled with no heat. Do not
remove load until COOL-DOWN
period is complete and dryer
stops. The signal (if selected) will
buzz for the final 10-25 seconds of
the cool-down.

Automatic Permanent
Press/Knits Cycle

Use this setting for permanent

press, polyester knits, heavy and
medium weight synthetics that are
“no-iron”.

The COOL TUMBLE portion of this
cycle is a 10 minute cool-down
(no heat) period. The end of cycle
signal (if selected) will buzz for the
last 10-25 seconds of cool-down. If
clothes are not removed at that
time, the timer will advance into
the Cool Tumble cycle, where the
signal will buzz 10-25 seconds
every five minutes of the 15 minute
cycle before dryer stops.

Suggested Dryer Settings

Automatic Permanent

Press/Knits Cycle

Load Type

Cycle

(Timer

Setting)

Permanent Press
Polyester Knits
Heavy and Medium

Weight Synthetics

More Dry

Lightweight, Délicates

Sheers and those
labeled "Dry With

Low Heat"

Less Dry

Always use the SIGNAL with the
AUTOMATIC PERMANENT

PRESS/KNITS cycle. Remove
load immediately upon completing

cycle. This reduces wrinkling.

502223

Advertising
This manual is related to the following products: