Cisco OL-12997-01 - Manual (Page 3)

B-3
Cisco IPICS Server Administration Guide
OL-12997-01
Chapter B Setting Up and Using a Cisco Unified IP Phone as a Cisco IPICS Push-to-Talk Device
Configuring Cisco IPICS as a Phone Service for Cisco Unified Communications Manager
• For Cisco Unified Communications Manager 5.x or later—Choose Device >
Device Settings > Phone Services.
Step 2 In the page for configuring IP phone services, enter the following information:
a. In the Service Name field, enter Cisco IPICS.
This field specifies the name that displays for the service on the Cisco Unified
IP Phone.
b. In the Service Description field, enter Access to the Cisco IPICS System,
or a similar description.
This field contains a description of the content that the Cisco IPICS service
provides. You can enter any appropriate description.
c. Cisco Unified Communications Manager 5.x only: In the ASCII Service
Name field, enter Cisco IPICS.
This field designates the name of the service to display if a phone cannot
display Unicode.
d. In the Service URL field, enter one of the following URLs:
– If you want to require users to log in before accessing the service, enter:
http://<ipics server IP address>/ipics_server/servlet/
IPPhoneManager
Replace ipics server IP address with the IP address of the Cisco IPICS
server.
– If you do not want to require a user to log in before accessing the service,
enter the following for the user:
http://<ipics server IP address>/ipics_server/servlet/
IPPhoneManager?method=LOGIN&user=<userID>&PIN=<pin>
Replace ipics server IP address with the IP address of the Cisco IPICS
server, userID with the digit ID of the user, and pin with the digit
password (PIN) of the user who will not need to log in.
This field specifies the URL of the Cisco IPICS service.