Blind stitching – SINGER WS1112 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 1
STEP 2
BLIND STITCHING
1. Use regttlar zigzag pressure foot and needle plate.
2. Insert Cam No. 20 into tlie machine.
3. Set needle position lever to "R" position.
4. Select stitching length desired.
5. Buttonhole dial must be set on "M" position.
Blind stitch hems provide a durable hem finish that is almost
invisible and comparable to hand sewing.
Prepare the garment in the same manner as for hand hemming.
Step 1. If hem with folded edge is used, make first fold 3/8
deep.
Step 2. Turn hem the depth desired and baste 1/4 from upper
edge. Press into place.
Step 3. Fold hem back toward right side of garment leavmg 1/4"
extended.
Step 4. Place garment under pressure foot and sew blind hem.
Fig. 21