SINGER 147-22 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In orderinc: from this list, use ONLY the PART number
in the FIRST column.
The number stamped on a Sewing Machine i)art is in every
case the number of the single part only.
Every combination of parts sent o>it as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the S.'^ME P.\RT in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows;
A. Hardened, Polished and Plated.
B. Polished and Plated.
C. Hardened only.
I). Polished only.
E. Soft, not Polished.
F.
Harilened and Polished.
O.
H. Blued.
J. Plated only.
K. Hardened and Plated.
li. Brass or Gilt.
M. Oxidized.
P.
Japanned.
R. Parkerized.
T. Cop))er-plated.
These letters MUST BE USED ivhen they appear in the list,
and AFTER the number as in the list.
In this series:
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates.
Illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-20
FOR TWO LINE STITCHING IN FABRICS, TWO NEEDLES. TWO
LOOPERS, FOR TWO-THREAD CHAIN STITCH; FOOT
LIFTER. GAUGES FROM TO Jg INCH.
NO. l’L.\l'E N.VME
*51001--------- .\rm, upper and lower (solid) with 94Si)
and 5-1034......................................................
42:it')t) 8901 .\rm Oil Pad (braided cotton) for oiling
;\rm Hock Shaft Front Bearing...................
5()00l) SitOl .Arm Oil Pad (braided cotton) for oiling
.\rm Rock Shaft Intermediate Bearing
11119 8901 .Arm Oil Tube with 29599, foroilingt)4321
29599 8i)01 “ “ “ Packing (felt)...............................
51002 8902 “ Hock Shaft....................................................
04380 8901 “ " “ Bushing (back)..
440c 8901 “ “ “ “ “ Set Screw
04388 8901 “ “ “ “ (intermediate)
423c 8901
.Set Screw.......................................................
52015 8901 .\nn Hock .Shaft Bushing Oil Pad (braided
cotton).............................................................