Removing extension table – SINGER W1855 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

REMOVING EXTENSION TABLE

To convert the macnine from flat bed
to free arm use simply remove the

tension table as shown.

THIS IS ONLY APPLICABLE TO MACHINES MANUFACTURED FOR THE UNITED KINGDOM

IMPORTANT

The wiref in thu mains laid are coloured in accordance with the following code:

BLUE - NEUTRAL

BROWN - LIVE

NOTE. As the colours of the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceeo as follows:

Connect BROWN wire to terminal marked L or coloured RED.

Connect BLUE wire to terminal marked N or coloured BLACK.

FIT CORRECT PLUG TO POWER CORD

WHEN USING A B-S. 1363 FUSED PLUG, A 3 AMP. FUSE MUST BE FITTED.

If the terminals of the plug are unmarked consult a qualified electrician before use.

V^en leaving the sewing machine unattended, the plug must be removed from the socket outlet

When servicing the sewing machine, or when removing covers or changing lamps the machine or
the electrical set must be disconnected from the supply by removing the plug from the socket

outlet

THE MAXIMUM INPUT OF LAMP: 240 V 15 W.

THIS APPLIANCE CONFORMS TO THE STATUTORY RADIO INTERFERENCE

SUPPRESSION REGULATIONS.

Advertising