To prepare for sewing – SINGER W3851 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TO PREPARE FOR SEWING
NEEDLE THREAD PICKS UP BOBBIN THREAD AS FOLLOWS:
Holding the loose end of the needle thread in your
left hand, turn the balance wheel toward you by hand
until the needle moves down and up again to its
highest point. Pull the needle thread gently and the
bobbin thread will come up with it through the
needle hole.
If the bobbin thread does not rise, check to see if at
least 3 or 4 inches of bobbin thread is hanging
loosely from the bobbin case. Then place bttth ends
of the thread back between the two presser foot. toes.
-
11
-
Advertising