SINGER W1260 - Manual (Page 45)

TWIN NEEDLE SWING
/V\AAA/\A
AAAA/VV\
TWIN NEEDLE SEWING EFFECTS
To usa a tvwn needle in the machine, remove the single
needle, and insert the twin needle into clamp with the flat
sitte to the Iwck. Threading of the machine when using a
twin needle is the same as normal v^h these exceptions;
1. Place thread, matching or contrasting in color, on each
spool pin.
2. Hold both threads together as you follow through
diread guides as normal, but separate the threads at the
tension. Pass on thread through the left disc and one
thread through the right disc.
3. Then pass threads through arm thread guide.
When using a twin needle, set the stitch width dial at 2 or
less to prevent needle breakage with a wide stitch.
Be sure to use the Middle Needle Position.
Note: Be sure zigzag needle plate and zigzag presser foot
are in place.
Panern: Any
Length; 5
Width: 0-2
Peed
D oq : a A
Pressure: Normal
Foot: All Purpose
Needle Position: 2
¿
5
^
DECORATIVE TUCKS OR DESIGNS
Any stitch can be used with the twin needle for decorative
effects.
Most attractive are the multiple stitch zigzag and blind hem
stitch for fancy tucks. The satin stitch or tapered zigzag
designs in two colors are effectK-e for creative trims.
Note: Remember to use no more than a 2 zigzag width for
twin needle sewing.
ii
ii
I I II
* V
\\
>>
11
I f
//
Vv
•k \
1 1
»
11
1 1
/ r
<v
\ \
\\
/>
/ / t 1
/ /
<<
k \
« \
>>
/ /
11
11
/ /
\ \
>>
//
11
11
* f
11
11
//'
/ /
(
/
F
F
(
F
C
L
F
IV
/
C
h
1
E
43