Transmitter button functions, Replacing remote control batteries – Code Alarm CA 5051 User Manual

Page 7

Advertising
background image

7

2010 Audiovox Electronics Corporation. All rights reserved.

Transmitter Button Functions

1 Way
Transmitter

Lock Unlock

Car Find /

Panic

Start Operation

Method

Lock X

Press and Release

Unlock X

Press and Release

Trunk

X

Push and Hold (3 Sec)

Car Finder

X

Press and Release

Panic

X

Push and Hold (3 Sec)

Remote Start

X

Press and Release (1 or 2 times
depending on selectable option)

Remote Start
Shut Down

X

Push and Hold (3 Sec)

Run Time
Extention

X

Press and Release 4 times.

2 / 3 Hour Start

X

Ignition ON/OFF, Press and Hold
Valet Button, Press Start 4 times

Daily Start Timer

X

X

Press Lock + Start

Replacing Remote Control Batteries

1-Way Remote Control:

The batteries (model CR2016) inside each remote control should last approximately

1 year under normal use. When the batteries become weak you will notice the
remote control range (the distance from the vehicle the remote control will work)
deteriorate and the small LED on the remote control will dim. To replace the remote
control batteries:

1.

Unsnap and disassemble the halves of the remote control.

2.

Remove the old batteries, observing the +/- symbols on the batteries
and replace with new CR2016 batteries.

3.

Reassemble the halves of the remote control.

4.

Test operation of the remote control.

Advertising