Lifting the presser foot – SINGER 1050 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To run the machine,
press the foot operated speed controller.
The speed controller has an electronic circuit which provides
constant speed when sewing on fabrics of varying density in
either speed range. You may also set your own speed for
sewing on delicate, light or heavy fabric. The
harder you
press,
the
faster
the machine will sew within the selected speed
range. The
lighter you
press, the
slower the
machine will sew
within the selected speed range.
Note:
Your machine has a built-in fuse which protects its
electronic brain. If the machine does not operate (stitch selector
lights do not light up) after making electrical connections and
turning on switch, the fuse may need to be replaced. Contact
your local Singer Sewing Centre for additional information.
Lifting the Presser Foot
The presser-foot lifter
A
allows you to raise and lower the
presser foot. Extra-high lift position
B
permits easy placement
of bulky fabrics. Make sure the lifter is all the way down
before starting to sew.
15