SINGER W816 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
"3i«jpi
HEM
Jse standard zigzag foot (Fig. 42).
••
?arK-th control at number 3 or 4.
Needle position control at “Center" position.
Zigzaci stitch width to suit materia! being sewn.
The lower the rrirmber, the smaller the sidewise stitch,
rjiii'icj Siiicn tianis provide a durable hem finish that is
almost invisible and comparable to hand sewing.
Prepare the garment in the same manner as for hand
hemming.
Step 1. (Fig. 43).Jf hem with folded edge is used make first fold % deep.
Step 2. Turn hem to the depth desired and baste
% "
from upper edge. Press in place.
Step 3. Fold hem back toward right side of garment leaving
K ’
extended.
Step 4. Place material under presser foot, sew with stitch length set to suit material
being sewn and make a side wise stitch about every %" of an inch of sewing.