The needle thread, Threading the needle – SINGER 514 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE NEEDLE THREAD
With tv>/o hands, slip Ihmad hori-
i^onially between tension discs
Hold thread firmly with left hand
and. with the right hand, lead the
thread down past the right throacl
guide and up to catch behind the
guide.
With left hand lead thread over
spring, pulling thread down in
direction of arrow and under guide.
Allow the gyring to return to its
normal 'up' position and continue
threading the machine.
Threading the Needle
1. Raise pressor foot to release the
tension discs and turn hand wheel to
raise the needle to its highest position,
2. Place spool of thread on spool pin
over felt and lead thread through to
points as shown, making sure to
# Thread tension discs as illustrated.
# Thread take-up lover from back to
front, guiding thread down over top
of lover and then up into eyelet.
# Thread needle from front to back
drawing about 10cm (4'0 of thread
through eye of needle.
16