Cleaning the machine, Before storing your machine – SINGER 9134 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING THE MACHINE
Your machine is designed to give you many years of dependable service. To ensure this
reliability, take a few minutes to keep the machine clean. How often you clean it depends on
how often you use it.
Using the lint brush, remove lint or dust
from:
-presser bar
-needle bar
-bobbin case (if there is a lot of lint in this
area, remove the bobbin case for
cleaning)
-machine surface (if necessary, dampen
a soft cloth and use a mild soap to clean
the surface)
Remove needle plate as instructed and
clean exposed area with a lint brush.
BEFORE STORING YOUR MACHINE
•To disconnect, turn all controls to off (“0”)
position, then remove plug from outlet.
• Unplug foot controller from machine.
• Lower presser foot lifter.
• Turn handwheel to lower needle bar to
the lowest position.
• Place your machine out of reach of
children In safe, dry location.