SINGER 7050 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2. Turn hand wheel toward you, lowering
needle into either hole of button.
3. Continue turning hand wheel until
needle rises and moves over the other
hole of button. Adjust width if neces
sary.
4. Lower needle into hole.
Run machine slowly making 6 or more
stitches .to attach button.
Remove work from machine, leaving 4"
(10cm) of thread.
To secure stitching, pull thread ends to
inside of garment and knot close to
fabric.
40
Advertising
This manual is related to the following products: