Cisco IP Phone 7945G User Manual
Page 66
58
OL-15896-01
Tips
•
(SCCP and SIP phones) Your phone might be set up for international call logging, which is
indicated by a “+” symbol on the call logs, redial, or call directory entries. See your system
administrator for more information.
•
(SCCP phones only) To view the complete call record of a multiparty call (for example, of call that
has been forwarded or transferred to you), highlight the call record and press Details. The Details
record shows two entries for each missed or received multiparty call. The entries are listed in
reverse chronological order:
–
The first logged entry is the name/number of the last completed call of a multiparty call
received on your phone.
Dial from a call log
(while connected to
another call)
1.
Choose
> Missed Calls, Placed Calls, or Received Calls.
2.
Highlight a call record.
Note
If the Details softkey appears, the call is the primary entry of a multiparty
call. See the
section below.
3.
If you need to edit the displayed number, press EditDial followed by << or
>>. To delete the number, press EditDial followed by Delete. (You may
need to press the more softkey to display Delete.)
4.
Press Dial.
5.
Choose a menu item to handle the original call:
•
Hold—Puts the first call on hold and dials the second.
•
Transfer—Transfers the first party to the second and drops you from the
call. (Press Transfer again after dialing to complete the action.)
•
Conference—Creates a conference call with all parties, including you.
(Confrn or Conference again after dialing to complete the action.)
•
EndCall—Disconnects the first call and dials the second.
See if the line in the
call log is busy
before placing a
call to that line
Look for Busy Lamp Field indicators. See
Using BLF to Determine a Line State,
Place a call from a
URL entry in a call
log (SIP phones
only)
1.
Choose
> Missed Calls, Placed Calls, or Received Calls.
2.
Highlight the URL entry that you want to dial.
3.
If you need to edit the entry, press EditDial.
4.
The
icon appears to indicate that you can begin editing characters in
the URL entry.
5.
Press Dial.
If you want to...
Then...