Cisco IP Phone 7945G - Manual (Page 52)

44 OL-15896-01
Using Barge Features
The table below describes how to use barge features to add yourself to a call on a shared line.
Tips
• When you barge a call, other parties hear a beep tone announcing your presence. With cBarge,
other parties hear a brief audio interruption and the phone screen changes to display conference
details.
• If a phone that is using the shared line has Privacy enabled, call information and barge softkeys
will not appear on the other phones that share the line.
• You will be disconnected from a call that you have joined using Barge if the call is put on hold,
transferred, or turned into a conference call.
Preventing Others from Viewing or Barging a Shared-Line Call
If you share a phone line, you can use the Privacy feature to prevent others who share the line from
viewing or barging (adding themselves to) your calls.
If you want to... Then...
See if the shared line is
in use Look for the remote-in-use icon next to a red line button .
Add yourself to a call
on a shared line Press the red line button for the shared line.
One of the following occurs:
• You are added to the call.
• A window opens on your phone screen prompting you to select the call
that you want to barge. Press Barge or cBarge to complete the action.
(You may need to press the more softkey to display Barge or cBarge.)
View conference
participants (if you
used cBarge) See Viewing or Removing Conference Participants, page 36 .
If you want to... Then...
Prevent others from viewing or
barging calls on a shared line 1. Press Private .
2. To verify that Privacy is on, look for the feature-enabled
icon
next to an amber line button .
Allow others to view or barge calls
on a shared line 1. Press Private .
2. To verify that Privacy is off, look for the feature-disabled
icon
next to an unlit line button .