Capresso 454 - Manual (Page 17)

10c. Filter Holder Insert (M)/ Drip
Stop (N):
Clean the filter holder
insert and the drip stop under run-
ning water. Check to make sure
that the drip stop closes com-
pletely under running water also.
10d. Bean Container (A): When
the bean container is empty, use a
dry cloth to wipe off any oil
deposits. Never pour any liquid
into the bean container. Never try
to disassemble the bean container.
10e. Burr Grinder/Burrs:
It is possible that small coffee par-
ticles might stick to the burrs.
Once every 2 months let the bean
container run out of beans.
Remove the glass carafe. Set the
grinder to 10 cups. Make sure the
GoldTone filter is inserted. Move
the filter holder underneath the
grinder. Set the fineness selector
to the largest dot. Push the on/off
button. While the machine is
grinding tilt the whole machine a
bit forward and pat it on the back.
This will loosen any coffee parti-
cles and transport them into the
filter holder. Repeat if necessary.
10f. Cleaning The Feeder
Channel
Periodically check the feeder
channel for oil and coffee build-up.
As long as you can see coffee
flowing freely through the feeder
channel window there is no need
to open the cover.
The feeder channel should be
cleaned in any of the following
situations:
• moisture or heavy oil build-up
has caused the ground coffee
to block the feeder channel, or
• you do not plan on using the
grinder for more than a week.
For cleaning, please follow this
sequence:
a. Lift the water container lid and
remove the cover lid. Make sure
the GoldTone filter or a paper
filter is inserted in the filter holder
insert.
loose coffee
packed coffee
17