Changing the foot, Buttonhole foot, Cording & zipper foot, and button foot – SINGER W310 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING THE FOOT
For most ordinary sewing the original
all-purpose foot can be used. How
ever, it is recommended to use the
following
special
feet
in
your
accessory box whenever you want a
better stitching result.
Straight Stitch Foot
This has only a narrow hole to accom
modate only straight stitching. It may
be used on sheer or soft fabrics for
more control.
Buttonhole Foot
This foot has a groove underneath, to
allow
the
narrow
satin
stitch
or
buttonhole to form evenly. However,
if skip stitches occur on sheer fabrics
with this foot, it may be necessary to
use thin paper underneath.
Cording & Zipper Foot, and Button
Foot
Use for sewing very close to the edge
of a cord or zipper, and sewing on
buttons respectively.
Use the large screwdriver to loosen
thumb screw. Turn the screw back
ward until the foot becomes loose.
Then, lift up on presser foot lever until
it is in its highest position in order to
remove the foot. Replace with desired
foot
and
tighten
thumb
screw
securely.