SINGER W4042 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
:^aqe 27
•.
••• ;i-'‘v'í
■— •
. .T . ■— '•
STITCH LENGTH DIAL
Set dial at indicating point
according
to
stitch
length
desired.
For a longer stitch, turn dial to
right. For a shorter stitch, turn
it to left. For normal sewing, it
IS set between 2 and 3.
CONTROL 0 £
LA PUNTADA
10 DE
Poner el control como se indi
ca en el punto de acuerda con
la puntada que se requiera
Para una puntada más larga
girar el control a la derecha.
Para una puntada más corta
girar el control a la izquierda.
Para la costura normal poner
SI control entre los números 2
y3.
Section
4
TURNING A SQUARE
CORNER
To turn a square corner 5/8”
from the tabric edge, stop
stitching with the needle tip
piercing the fabric. Raise the
presser foot and turn the fabric.
New stitching line will align
with 5/8” seam guide on side
of needle plate. Lower the
presser foot and begin stitch
ing in a new direction.
CAMBIO DE DIRECCION
DE PESTUNTE
Parar la máquina en el punto
de rotación con la aguja en el
tejido. Subir ia palanca dei pie
prénsatelas y girar el tejido en
ei sentido deseado. Bajar ia
palanca del pie prénsatelas y
volver a coser en ia nueva
dirección.