SINGER 319K - Manual (Page 28)

26
TO START SEWING TO REMOVE THE WORK
Fig. 35
1. Bring take-up lever to
its highest point. Place ma­
terial under presser foot.
2. Position needle in the
fabric.
3. Lower foot. Hold threads
which have been drawn to
the back toward the right
under the foot. Press con­
troller pedal to start ma­
chine. The speed depends
upon the amount of pressure
on the controller pedal.
Fig. 37
4. Stop machine with take-up
lever at its highest point.
5. Raise foot, draw fabric toward
the back and left and sever
threads on thread cutter.