Before sewing – SINGER W1744 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BEFORE SEWING
Connect
light
cord,
motor
wire
2
plugs
into
power
supply separately.
1. Remove or install bulb from
inside of face cover.
2. Open face cover in direction
of arrow,
3. Remove bulb by unscrewing
it counter clockwise.
4. Install a new bulb by screw
ing it in clockwise.
5. Use a screw type bulb with
120V/15W. (Max)
Advertising