1001st performance specifications and features – Cable Electronics 1001ST User Manual
Page 4
1001ST
PERFORMANCE SPECIFICATIONS
And Features
Interface
Tuning
Push but ton digital cont rol
Display
2 ½ Digit, Seven Segment Digit al Readout
Mode
Selects Off-Air or Cable output frequencies
Video
Input Level:
Standard 1 Vp-p
Input Impedance:
75 ohms
Connector:
RCA
Audio
Full MTS Stereo Compatibility.
Input level:
Standard 1 Vp-p ( 2 Vp-p max )
Input Impedance:
22K ohm minimum
Frequency Response:
20 Hz to 14 kHz
Channel Separation:
Greater than 30 dB typical
Signal to Noise:
60 dB
Distortion:
Less than 0.5 %
Connector:
Two RCA, Right and Left
Misc.
Channel Range:
UHF 14 to 69, Cable 65 to 94, 100 to 125
RF Output Level:
+20 dBmV, F connector
Power Supply:
9 to 12 Vdc, 250 mA minimum
Size:
3.9 x 3.9 x 1.5 inches
Internal Band Pass Filtering to virtually eliminate spurious signals
Stereo encoder is Macrovision compatible for use w ith DVD and VCR sources