Adjusting stitches to suit stretch fabrics, Guiding and supporting fabric – SINGER 7106 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
adjusting stitches to suit stretch fabrics
GUIDING AND SUPPORTING FABRIC
Most fabrics of stretch or knit construction
need only to be guided in front of the presser
foot when you use one of the stretch stitches.
Some fabrics — nylon tricot and elasticized
fabrics, for example — do require support
while being stitched.
• For nylon tricot and similar synthetic knits,
apply
gentle
tension by holding the seam in
front and back of the presser foot as you
sew (illustration
A).
• For elasticized fabric, stretch lace, and knits
with an unusual amount of elasticity, apply
firm
tension in front and back of the presser
foot to stretch the seam as the stitches are
being placed (illustration
B).
CAUTION: Do not pull the fabric while you are
stitching as this may deflect the needle, caus
ing it to break.
ADJUSTING PRESSURE WHEN
SEWING KNIT AND STRETCH FABRIC
Some knit and stretch fabrics, because of
their structure, require either more or less
than normal
(NORM)
presser bar pressure to
feed smoothly and evenly.
•
• For thick, soft or very stretchy knits, de
crease pressure by turning dial from
NORM
toward ^
• For nylon tricot, ciré and similar hard sur
face synthetic knits, increase pressure by
turning dial from
NORM
toward
MAX.
»
»
■
27