Removing the work – SINGER W8931 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
16
is
“9
Kg. 21-A
P!g. 21-3
REMOVING THE WORK
Be sure to stop the machine when the thread take-up lever and needle bar are at the
highest position.
Now raise the presser foot and draw the fabric back and to the left, Fig. 21-A and B, and
pass the threads over the thread cutter.
Pull down slightly, holding thread in both hands, so as not to bend the needle.
"
Leave the ends of thread under the presser foot.
Advertising