Preparing to sew – SINGER W173 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
darning
and
mending
n ord.r W move the fabric freely m any direction tor d.rmng
>nd mending, release the pressure cap B completely by press
ing down on the snap lock, (A, Fig, 21).
Turn the knob to-DN" position, which drops the feed we
below the needle plate. To return feed to normal, return knob
to “HI”.
PREPARING TO SEW
Fig. 21
Have taKe-up lever at highest point before starting to se
DO not try to help the feeding by pulling the material as this
may deflect the needle and cause it to break.
never
run machine without material under the presser foot
Place material and threads in position under the presser foot and lower ^he P^^^
Turn the hand wheel toward
;Vt:;:,:V:n. Tt " n:. necessary to touch the
to begin sewing. By having
fvontrol The speed of the machine
hand wheel to start the machine. Vou merely pres, “
°
J
.
■
т^oт'I-f»asina the amount of pressure exeneu un
is regulated by increasing or decreasing