SINGER W1066 (older model) User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
If Machines
Binds
BOBBIN
CASE
CLAMPS
BOBBIN
RAC:
LATCH
2 — Turn clamps outward and remove race cover.
3— Remove hook.
. • i j
4 — Clean thread and lint from all parts, includ
ing race.
5 — Run a drop of oil along rim of hook.
6 — Replace hook, then race cover. Snap clamps
into place.
1 , 1 j
7 _Grasp threaded bobbin case by latch and re
place, fitting tongue into notch of race cover.
Advertising
This manual is related to the following products: