Attaching the presser foot, Removing the presser foot, Attaching the seam guide – SINGER 1116 User Manual
Page 11: Attaching the presser foot holder
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Raise the presser foot bar with the presser foot lifter (a).
Attach the presser foot holder (b) as illustrated (1).
Attaching the presser foot
Lower the presser foot holder (b) until the notch (c) is directly
above the pin (d).
Raise the lever (e).
Lower the presser foot holder (b) and the presser foot (f) will
engage automatically (2).
Removing the presser foot
Raise the presser foot.
Raise the lever (e) and the foot disengages (3).
Attaching the seam guide
Attach the seam guide (g) in the slot as illustrated. Adjust
according to need for hems, pleats, etc. (4).
□ Attaching the presser foot holder
Attention:
Turn power switch to "ofT when carrying out any of the
above operations!
8