Cobra Electronics ESD-9150 - Manual (Page 7)

Quick Start
8
Set Muting Mode
Auto Muting
Automatically reduces volume of alert in progress
after 4 seconds.
Set Muting
Mode
Operation
9
Manual Muting
Press and release MUTE button to reduce
volume of alert in progress.
To Switch Between Modes
Press and release MUTE Button when no
signal is being received, to switch from Manual
to Auto Mute.
1
1
Turning
On Yo u r
E SD-9 1 5 0
Turning On Your ESD-9150
Plug power cord
into detector. Plug power cord i nto
c i g a re t te lighte r. 2
ON mode
Rotate ON-OFF Volume Control to the left
( away from yo u ) . Th ree power ON co n f i rm at i o n
beeps will be heard and all LEDs will light up
from left to right in sequence.
One of the compass LEDs will remain lit to
indicate the unit power is ON.
Note
The factory default mode
is Auto Muting. For more
detailed operation
instructions on setting
muting mode, see page 12.
Note
The compass must be
calibrated before initial use.
For more detailed instru ct i o n s
on compass calibration,
see page 13.