How,tq. conweci the machine to the power supply, Caution – SINGER W1415 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW,TQ. CONWeCI THE MACHINE TO THE POWER SUPPLY
1, Fit the machine plug into the machine.
2. Plug the machine to the power supply.
Note: ■'Before plugging in the machine, be sure'-that the voltage and
number of cycles indicated, is conformed to your electrical
power supply.
HOW TO USE THE SPEED CONTROLLER
Sewing speed can be varied by the spegd controller. The harder you
press on the controller, the faster the machine runs.
Note:*By releasing the controller, the machine stops running auto
matically.
'Before using the machine, practice controlling the speed
with-out threading,
SEWING LAMP
The sewing lamp is located behind the face plate.
Bulb type (A) :
® To remove ... Unscrew
® To replace ... Screw in
Bulb type {Bj :
• To remove ... Push and twist out
»To replace ... Push and twist in
Note:'Before replacing a bulb. Remove plug from power supply,
power supply.
'Bulbs are available from sewing machine retailers. {Use a 15-
Watt bulb)
Caution!
Before leaving the machine, changing parts or doing any other work
on machine, always remove plug from power supply or wall socket.
Never place anything on the speed'controller, otherwise the machine
will
start inadvertently or the controller or motor may burn out.