SINGER 5147 User Manual
SINGER Sewing machines
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- CHANGING THE NEEDLE
- CHANGING PRESSER FEET
- To Remove and Replace Foot
- REMOVING AND REPLACING NEEDLE PLATE
- ATTACHING SNAP-IN FEED COVER
- ATTACHING THE SEAM GUIDE
- CONNECTING THE MACHINE
- ADJUSTING BOBBIN-THREAD TENSION
- SPOOL HOLDERS
- ADJUSTING STITCH LENGTH
- Setting the Dial
- NEEDLE-THREAD TENSION
- BOBBIN-THREAD T-ENSION
- ZIPPER INSERTION
- PATTERN SELECTOR
- STITCH WIDTH SELECTOR
- ADJUSTING NEEDLE-THREAD TENSION
- ADJUSTING STITCH LENGTH
- ADJUSTING PRESSER FOOT PRESSURE
- Accessory and Selector Settings
- ADJUSTING STITCH LENGTH
- ADJUSTING NEEDLE-THREAD TENSION
- APPLIQUÉ
- Preparation
- Method 1 - Trimming after Stitching
- Method 2 - Stitching after Trimming
- awvwwwwvwi
- SELECTING A PATTERN
- ADJUSTING STITCH LENGTH
- ADJUSTING WIDTH OF DESIGN
- GUIDING AND SUPPORTING FABRIC
- ADJUSTING PRESSURE WHEN SEWING KNit AND STRETCH FABRIC
- BLINDSTITCH
- Blindstitch Hems
- SLANT OVEREDGE STITCH
- Overedged Seams
- BUTTONHOLE POSITION
- BUTTONHOLE LENGTH
- FOUR-STEP BUTTONHOLING
- Preparation
- Step A: Side Stitching
- Step B: Bar Tack
- Step C: Side Stitching
- Step D: Bar Tack
- CLEANING AND OILING YOUR MACHINE
- CHANGING THE LIGHT BULB
- Removing Bulb