SINGER WS1145 - Manual (Page 20)

NARROW HEMMER
With the needle
regnler presser foot vath n»r»w hemm
For a plain narrow hem, make a x/o
fold for about two inches along edge
each end of the two inch fold, slip underneatn
hemmer. Bring fold up in to the ^emme^.
draw forward to end and ¿д ends
needle. Lower presser bar liiter. (o.entiy p
of thread as you start stitching. i
Guide material slightly to right, and it will take
a double turn through scroll.
lace trimmed hem . T o sew a
snd attach lace in one i“““ "bove
slot next to needleCFig. 36) S®», b“ « »bove,
auiding lace under needle and hem into scroll.
tACE EDGE WITH INVISIBLE STITCHING. Hdd
lace 1/8 inch fronj raw edge on right side ‘“b'“'
Insert both in scroll as for plain 9“««
Let hem roll over and sew m lace. Press la
flat along edge with hem turned up. . , ,
It is possible to have a little fullness in lace y
feeding it freely under scroll.
FRENCH SEAM. With right sides together, place
top piece of material 1/8 inch inside edge of lower
piece. ,,
Insert in hemmer scroll, allowing hem to ro over
and sew in top fabric, making French seam.
Fig. 35
.Fig. 36
23